Connexion avec identifiant, mot de passe et durée de la session
Benefits of this firmware update It has improved the camera operation in low temperatures. Inconsistent performance of the viewfinder, main display, shutter and image saving has been improved.
[Benefit of the update]・It has become compatible with the SIGMA 70mm F2.8 DG MACRO | Art for Canon.
It has corrected the phenomenon where it occasionally stops communicating after recovering from Auto Power Off.
It has become compatible with the SIGMA 105mm F1.4 DG HSM｜Art for Canon.It has become compatible with the SIGMA interchangeable lenses for Canon that have the latest firmware Ver.2.01.
It has become compatible with the SIGMA 70mm F2.8 DG MACRO｜Art for SIGMA.It has become compatible with the SIGMA 105mm F1.4 DG HSM｜Art for Canon.
It has corrected the phenomenon that the continuous shooting speed of some SIGMA interchangeable lenses with firmware Ver.2.00 decreases in certain combinations with some cameras.
MAJ, Sigma SD Quattro...https://www.sigma-global.com/en/news/2018/06/20/1724/
It has become possible to automatically retract the lens barrel of the SIGMA 70mm F2.8 DG MACRO | Art, when the camera’s power is turned off.It has set the maximum shutter speed in SFD (Super Fine Detail) Mode to 1/500 sec., so as not to duplicate shutter speeds of the individual images.It has corrected the phenomenon that the X3F/X3I images taken with SIGMA Capture Pro cannot be developed properly when the value adjusted by SIGMA Photo Pro is saved to the file.It has corrected the phenomenon that the images occasionally show some green or magenta color rendering after updating the firmware.
Des Sigma SD Quattro (en version 1.10) et SD Quattro H (en version 1.06) :