"Reflex", un reflex argentique à dos et monture interchangeables sur Kickstarter

Démarré par Mistral75, Novembre 07, 2017, 15:06:54

« précédent - suivant »

stratojs


JMS

Lors des débuts du 5D Mk II on en a vu qui achetaient des bagues avec index de commande de diaph pour faire de la vidéo avec un 14-24 Nikon.... ;)

Buzzz

Citation de: JMS le Janvier 06, 2019, 19:14:18
Lors des débuts du 5D Mk II on en a vu qui achetaient des bagues avec index de commande de diaph pour faire de la vidéo avec un 14-24 Nikon.... ;)
Et avant ça, en 2001, quand Contax a eu la bonne idée de changer de monture (Contax N), les orphelins de la monture Contax/Yashica ont utilisé des bagues d'adaptation pour utiliser leurs objos Zeiss chèrement acquis sur des Canon EOS argentiques.
Et d'ailleurs cela est toujours d'actualité sur les bo$itiers numériques, certains objectifs Zeiss en monture C/Y étant toujours très recherchés (et chers) comme le 85/1.2 ou le 21/2.8...

Buzzz

Fabien3D

 [at] JMS C'est toujours bon d'être cité ! Cela prouve au moins qu'on a été lu attentivement ! Quand j'ai écrit ces lignes, il me semblait bien plus facile de trouver des bagues d'adaptation pour hybrides dans le moteur de recherche d'eBay - j'en trouvais des listes interminables - mais parmi elles, je ne trouvais que rarement des bagues pour appareils reflex.

Quant à savoir si je suis un canoniste ou un nikoniste, ni l'un ni l'autre, la liste des appareils - non encore exhaustive - sur mon site mon ouverture à toutes les marques, sans chercher à appartenir à une chapelle plutôt qu'une autre. Il est bien plus intéressant d'aller là où mes pas me portent - en photographie, tout comme dans ma vie réelle...

Mistral75


Mistral75

Citation de: ReflexSince the compulsory development of the XH1 shutter we have reached out to senior and industry experienced engineers for support. This is adding value, not only to the shutter design, but also in general technical support and better understanding of materials and the industrial manufacturing process.

As it stands now, we see the first fully functional pre-production series finished by late July and then the actual shipping of the first batches at the end August. We really want to hit this target, as we see it as a bit of an ultimate test for ourselves and for Reflex as a company.

Source : Camera, lens and other updates... — Kickstarter

Considérant là où ils en sont ("Nous avons fait appel à des ingénieurs chevronnés et expérimentés de l'industrie pour obtenir de l'aide. Cela ajoute de la valeur, non seulement à la conception de l'obturateur, mais aussi en matière d'assistance technique générale et de meilleure compréhension des matériaux et du processus de fabrication industrielle."), leur objectif d'avoir des modèles de pré-production prêts fins juillet et d'expédier les premiers lots fin août semble très optimiste.

Mistral75

Des nouvelles du Reflex qui s'appelle maintenant Model II :

Citation de: Team ReflexOver the summer a lot of work has gone into moving the Reflex I closer to its production deadline and while we continued to develop the new shutter, other parts of the camera kept evolving as well...

Due to an entirely new shutter unit, a chassis redesign, adding a more powerful processor and battery, upgraded controls, new winding mechanism, new dark slide design and some aesthetic and ergonomic improvements, we can no longer speak about the model we presented back in October of 2017.

Add to this an aperture controlled ARi Plate and we have a model II.

Flight Forward

With this we're gearing up for a fresh start and have informed our manufacturing partners to start tooling up for the new model instead. Full specs will follow soon. The Reflex II will come in both black powder coating and metallic.

Pre-Production Units

A series of 75 pre-production units will be produced ahead of principal manufacturing and sent out to a selection of camera testers ranging from professionals to hobbyists.

While we received more than hundred requests in the testers program, we want to allocate a minimum of 25 units to our Kickstarter backers. To anybody who is an actual camera backer, we will contact you in the next month to see who's interested.

PhotoPlus, Oct 24-26, New York

Based on our success rate in this department, we need to be careful with promises and dates, but we will be present at the PhotoPlus NY, October 24-26 in some form or way. The working scenario is that we bring the Reflex model II and 40mm lens.

Next...

In the weeks to follow we will be working hard to make this a reality as we have continuously done so, but we also understand we have lost the trust and patience of some of the backers. This is only normal as we are now 1 year past our original shipping date.

The only thing we can say here is that we are dedicated to make it happen. Otherwise we would not have persisted this long.

So to all of our backers, we can only say thank you and we are really doing all we can as not to disappoint you.

Source : Reflex: Bringing back the analogue SLR camera by REFLEX » Reflex Model II — Kickstarter

titisteph


parkmar

En plus des ingénieurs, ils devraient également faire appel à des designers !

remi56

Difficile de faire plus poche et plus inutile.
Je ne crois pas que je vais revendre mes Nikon, Leica ou Olympus.
instagram: abilisprod

MFloyd

Encore un autre couac.

Je crois que les rares projets (*) qui ont réussis dans le domaine de la photo, sont ceux de Peak Design https://www.peakdesign.com/ La dernière levée de fonds qu'ils ont faits, était autour de leur « trépied de voyage », et a été un véritable succès (je parle de la levée de fonds, pas du produit).

(*) un autre couac très probable sera Ferrania (films argentiques). Sans parler de Meyer Optik Goerlitz qui a carrément fait banqueroute.

Soyez très attentifs et précautionneux avec tous ces projets de crowdfunding.
(cliquez ev. sur l'image)

luistappa

Citation de: titisteph le Août 27, 2019, 09:36:05
Toujours aussi laid. On dirait une chinoiserie de brocante.
Tu es méchant avec les appareils Chinois.
Phenix with K mount by luis tappa, sur Flickr

Bon OK il faut aller à Kiev pour trouver aussi sexy :D
Kiev 19 by luis tappa, sur Flickr
Nikon F6/D500/Z5 - Sony A7II

JMS

Citation de: luistappa le Août 31, 2019, 22:18:00
Bon OK il faut aller à Kiev pour trouver aussi sexy :D

Curieux comme ce Kiev ressemble à un glorieux projet kickstarter Elbaflex  ;D ;D ;D

luistappa

Tiens je l'avais déjà oublié celui-là, c'est vrai qu'ils avaient fait fort en copier-coller.
Nikon F6/D500/Z5 - Sony A7II

Buzzz

Citation de: titisteph le Août 27, 2019, 09:36:05
Toujours aussi laid. On dirait une chinoiserie de brocante.

+1

Citation de: luistappa le Août 31, 2019, 22:18:00
Tu es méchant avec les appareils Chinois.
Phenix with K mount by luis tappa, sur Flickr
Celui-ci ne doit pas être tout à fait chinois à la base, c'est un clone du Vivitar V3800N, qui dérive lui même du fameux Cosina C1 (qui a été décliné sous toutes les marques imaginables ou presque).

Vivitar V3800N and Phenix DC303N by Henryjr56, sur Flickr

Buzzz

Arnaud17

Citation de: Buzzz le Septembre 05, 2019, 19:21:34
+1
Celui-ci ne doit pas être tout à fait chinois à la base, c'est un clone du Vivitar V3800N, qui dérive lui même du fameux Cosina C1 (qui a été décliné sous toutes les marques imaginables ou presque).

Vivitar V3800N and Phenix DC303N by Henryjr56, sur Flickr

Buzzz

Des clones de Minolta X300 je crois ?
En Grande Bretagne, ça se vendait sous le nom de Centon et ça pesait un âne mort.

veni, vidi, vomi

Buzzz

Les dérivés de ce réflex Cosina (manuel ou à priorité ouverture) sont très nombreux (liste non exhaustive) :

ARGUS STL1000
BAUER RX1
BAUER RX2
CANON T60
CARENA CX-300
CARENA CX-500
CARENA KSM-1
CARENA KSM-2
CAVALIER MSTL
CIMKO LS-1
COSINA C1
COSINA C2
COSINA CS-1
COSINA CS-2
COSINA CS-3
COSINA CT-1
COSINA CT-1 SUPER
COSINA CT-10
COSINA CT-1A
COSINA CT-1EX
COSINA CT-1G
COSINA CT-20
COSINA CT-4
COSINA CT-7
COSINA CT-7D
COSINA CT-9
COSINA CT-90
COSINA CX-2
COSINA EL SOLAR
COSINA HI-LITE
ELICAR MN-1
EXAKTA HS-10
EXAKTA HS-2
EXAKTA HS-3
EXAKTA HS-4
EXAKTA HS-40
EXAKTA KE-5
EXAKTA TWIN TL
HAKING HG1
HAKING HG2
HANIMEX DR-1
KENLOCK KG1
MIRANDA MS-1
NIKKOREX F
NIKON FE-10
NIKON FM-10
OLYMPUS OM-2000
PANAGOR CT1EX
PANAGOR CT90
PENTAX P30T
PETRI GX-1
PETRI GX-2
PETRI GX-3
PETRI GX-4
PETRI MF101
PETRI MF102
PETRI MF103
PETRI MF104
PETRI MF2
PETRI MF3
PETRI MF4
PRINZFLEX SUPER TTL
QUANTARAY DZ-RZ
QUANTARAY R400
QUANTARAY RZ800
RICOH KR-5
RICOH KR-5 SUPER2
RICOH KR-500
RICOH SINGLEX TLS
RICOH XR-1
SEARS SL2
SEARS TLS
SEIMAX SV7
SEIMAX SV9
SOLIGAR SC-1
TOPCON AM-1
VIVITAR 220SL
VIVITAR 420SL
VIVITAR 650SL
VIVITAR V2000
VIVITAR V6000
VIVITAR XV2
VIVITAR XV3
YASHICA FX3 SUPER 2000

Buzzz

luistappa

Les Phenix ont effectivement du mal à cacher leur origine mais ils ne sortent pas de l'usine Cosina mais bien de chez Phenix en Chine qui les fabriquaient sous licence.

La particularité de ce clone Chinois est d'avoir un dos et un capot métallique et non plastique comme le modèle Cosina. Ils sont moins récent que les DC303N.

Ça ne pèse pas le poids d'un âne mort et la qualité apparente est plutôt bonne. Les modèles vendus à l'étranger étaient un peu différents et non badgé Phenix mais sous une marque distributeur.
Nikon F6/D500/Z5 - Sony A7II

luistappa

Le Vivitar qui lui ressemble est plutôt le V3000S.

Dans la série Des clones du Cosina il y a eu aussi un boîtier badgé Contax, le S2 avec une grosse variante, le capot et la semelle en titane :8

On peut aussi y ajouter les Voigtlander Bessa séries L, T et R qui en sont des adaptations telemetriques (ou pas pour les L) en M39 ou en baïonnette Leica.
Nikon F6/D500/Z5 - Sony A7II

JMS

Tiens donc, le Nikkorex F ? On ne prête qu'aux riches Cosiniens, il était construit par Mamiya il me semble.  ;)

stratojs


Mistral75

Still kickin' :

Citation de: Team ReflexRecently we have found ourselves wondering (often out loud), if there is anything else that can go wrong, and while answer is "yes, most definitely" we are slowly learning that it is not only about avoiding setbacks, but also about how to best manage them when they eventually do happen.

And while the above image shows the design for a near-finished Reflex Model II, we have failed to meet our PhotoPlus deadline, causing more delays and timeline shifts.

So what went wrong?

In short, a mismatch between the hardware and firmware departments caused a substantial setback on the electronics DFM. A combination of poor HR judgement (due to a lack of experience on our end) and a set of wrong decisions, caused one team to underdeliver and another team to consequentially walk out. On top of that, we suffered an unfortunate setback in project management, causing even more delays.

How does this happen?

Due to our small budget, we have to work project based with certain departments and do not always have the option to hire exactly who we want or need. Due to this and some rushed decisions under pressure, we ended up with two incompatible departments. Incompatible to such an extent that it was almost surreal to witness at times. This entire episode set us back in a way that the day of the deadline felt like the day we started, two months prior.

Tho this is not exactly true, as we do have a finished circuit design and we don't have to start the firmware design entirely from scratch. Or in plain English; the electronics are advanced but not finished.

What about PhotoPus mentioned in update #22?

We did everything that was possible to get a pre-production Reflex ready for the PhotoPlus Fair in NYC last month. We had been invited by the good people at B&H to showcase the camera and lens at the main booth. The deal was that if the production was advanced enough, we would launch both camera and lens pre-sales at the fair. And while we did make it to the fair, it was a joint decision not to showcase the product at this stage.

How are we doing?

In all honesty, this last one was a bit of a blow, as it completely blindsided us. It's not something easy to write about either and It's hard to deny that recent events have not put a dent in our confidence. But we have regrouped and gone back to work, looking for a new EE team and starting off where things got left.

So what's next?

The hardest part after each delay or setback is the reboot... refinancing, reorganizing timelines, launch dates, push manufacturing, etc... this consumes a lot of time and energy.

On the other hand, the 40mm lens is tested and ready, and waiting to start generating income. However, we want to show a working Reflex camera as part of the launch campaign, so in the weeks to come we will focus on finishing what we started for PhotoPlus. This way we can showcase a working and production ready camera.

When we get to this stage we will start putting out the before-mentioned test samples and contact those who want to be involved in the testing.

JMS

Cela doit commencer à devenir décourageant pour les clients cette histoire sans fin... ???

stratojs


Victor