[ Forum MATERIEL ] > Forum SIGMA Appareils

Sigma FP

<< < (67/67)

stupido:
Yes ,ça va trop vite pour moi ..
Pour ça que en mode 3/2 je fais des crops carrés

Verso92:

--- Citation de: stupido le juillet 27, 2021, 08:41:11 ---Yes ,ça va trop vite pour moi ..
Pour ça que en mode 3/2 je fais des crops carrés

--- Fin de citation ---

Tu peux déjà jeter un œil au lien vers RawDigger, que j'ai posté au-dessus : c'est en anglais, mais très instructif sur les données mises en jeu et sur les limites intrinsèques des développements, surtout en Jpeg.

Mistral75:
Mise à jour en version 3.01 du logiciel embarqué du Sigma fp :

Firmware update for the SIGMA fp / SIGMA fp L | Cameras | Products | News | SIGMA Corporation


--- Citation de: Sigma ---
* It corrects the phenomenon whereby image data taken during tethered shooting using the photo editing software “Capture One 21 (14.4.0)” released by Capture One A/S may sometimes corrupt when the image quality is set to DNG (RAW) on the camera.
--- Fin de citation ---

Procédure de mise à jour et téléchargement du logiciel : Firmware download | Support | fp | fp Series | Cameras | SIGMA Corporation

Mistral75:
Mise à jour en version 4.00 du logiciel embarqué du Sigma fp :

Major firmware update for the SIGMA fp | Ver.4.00 | Cameras | Products | News | SIGMA Corporation


--- Citation de: Sigma ---
* It adds the “False color” function where the exposure status on the screen is displayed in different colors, allowing users to easily see the exposure status of any part of the frame.
   
* It adds the “Focus Ring Control” function that allows users to change the movement of the focus ring to either linear or non-linear.


* Only for compatible lenses.
* To use this function, it is necessary to update the firmware of the compatible lens to the latest version.   
* It adds the “STILL / CINE Link Settings” function that allows users to select whether or not they want to link key exposure settings between STILL and CINE modes.
The following settings are affected: Shooting Mode, Shutter Speed, Aperture, Exposure Compensation, ISO Sensitivity.
   
* It allows the “Screenshot” and “False color” functions to be assigned to “Custom button functions”.
   
* It changes the specification so that the countdown before a shot in self-timer mode (2 seconds and 10 seconds), and the exposure time for long exposures (bulb shooting and exposures of 1 second or longer) are displayed on screen.
   
* It adds a function available in STILL mode where information from the attached lens (focal length and shooting distance) can be displayed on screen.
   
* It adds a “Clip Numbering” function in CINE mode that allows users to change the clip numbering of the “File name / Number” in the “SYSTEM” menu.
【For Blackmagic Design Video Assist 12G Series users】

Blackmagic RAW recording using the HDMI output of SIGMA fp updated to Ver. 4.00 may not perform correctly without updating the Video Assist firmware. This issue has been corrected in the “Video Assist 3.5.2 Update” released by Blackmagic Design Pty Ltd on February 16, 2022, so please update your software accordingly.
--- Fin de citation ---

Procédure de mise à jour et téléchargement du logiciel : Firmware download | Support | fp | fp Series | Cameras | SIGMA Corporation

Mode d'emploi à jour des nouvelles fonctionnalités : https://www.sigma-global.com/en/wp/wp-content/themes/sigma/tool/s3_io.php?filepath=en%2Fwp%2Fwp-content%2Fdownload%2Fcatalog-resource%2Fcameras%2Ffp%2Ffp_Manual_FW_Ver.4.0_EN.pdf&show=1 (en anglais)

Navigation

[0] Index des messages

[*] Page précédente

Utiliser la version classique