Nouveau Fujifilm GFX100RF Specs and Features

Démarré par anakao, Mars 19, 2025, 01:51:36

« précédent - suivant »

doppelganger

Citation de: bsa76 le Juillet 07, 2025, 13:18:51Je comprends, Fuji va sûrement le proposer comme sur la série des X100. D'ailleurs c'est peut compatible entre le x100 et le GFX100RF ?

J'allais pour dire que rien n'est moins sur et que la solution aurait certainement été annoncée en même temps que l'appareil. Mais après vérification, les convertisseurs du X100 sont sortis en 2012, alors que le X100 a été annoncé en 2010. L'espoir est donc permis.

fredz

Citation de: bsa76 le Juillet 07, 2025, 13:18:51Je comprends, Fuji va sûrement le proposer comme sur la série des X100. D'ailleurs c'est peut compatible entre le x100 et le GFX100RF ?

Vu la taille/diametre de l'objectif c'est fort peu probable a mon avis

christal2

Fujifilm a publié une mise à jour du firmware pour le GFX100RF en version: 1.10  (22 juillet 2025)
ainsi qu'un guide des Nouvelles Fonctionnalités Version 1.10

https://www.fujifilm-x.com/fr-fr/support/download/firmware/cameras/gfx100rf/

Detail of the firmware update
Ver.1.10
The firmware update Ver.1.10 from Ver.1.00 incorporates the following issues:

< Important notice after firmware update >
* After the firmware update, you cannot connect the camera to the iOS version of FUJIFILM Camera Remote. Be sure to upgrade your smartphone or tablet to iOS13 or later and use FUJIFILM XApp instead of Camera Remote.
* After the firmware update, you cannot use the FUJIFILM Camera Remote (Android version) to connect with the camera through Bluetooth: Ver.4.1 and earlier. To pair via Bluetooth, smartphone/tablet must be Bluetooth Ver. 4.2 and latter.


Regarding the details of No.1 download the "GFX100RF New Features Guide[Ver.1.10]" from our website.
GFX 100RF New Features Guide: English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic

1.  The wireless communication security is enhanced while camera is connecting with a smartphone application or external device wirelessly.
After updating the firmware, security will be enhanced, so the connection procedure with the smartphone application will be changed, or the "WIRELESS COMMUNICATION" setting menu on the camera will be deleted (see section, <Changes after firmware update> below for details).

    < Changes after firmware update >
    1) The procedure for pairing the camera with a smartphone is changed.
    2) "WIRELESS COMMUNICATION" option in the "SHOOTING SETTING", "MOVIE SETTING", and "PLAY BACK MENU" are removed.
    3) "WIRELESS COMMUNICATION" option is removed from the functions assigned by the following operation flow in the "Setup Menu".
・Operation flow: "BUTTON/DIAL SETTING" ➔ "FUNCTION (Fn) SETTING"
    4) "WIRELESS COMMUNICATION" option is removed from the "Fn1 BUTTON SETTING" menu in the "BUTTON/DIAL SETTING" of the "Setup menu".
    5) "instax PRINTER CONNECTION SETTING" menu is removed from the "NETWORK/USB SETTING" of the "Setup menu" .
    6) "instax PRINTER PRINT" option is removed from the "PLAY BACK MENU".

< Precautions After Firmware Update >
    1) Network security level is improved by updating to the latest versions for both the smartphone applications (FUJIFILM XApp / FUJIFILM Camera Remote) and connected cameras, since the latest versions change the network setting menus and connecting procedures to enhance the wireless communication security.
Be aware that the security level remains unchanged in the following case.
・In case that the camera's firmware is the current version, and the smartphone application (FUJIFILM XApp / FUJIFILM Camera Remote) is the latest version.

    2) After updating the camera firmware, if the smartphone application (FUJIFILM XApp / FUJIFILM Camera Remote) is not updated to the latest version, you cannot connect to the camera. Be sure to upgrade your smartphone application software to the latest version.

    3) After updating the firmware, the "WIRELESS COMMUNICATION" setting menu of the camera will be removed, so if the "CONNECTION MODE" setting in the "NETWORK/USB SETTING" menu is set to "USB TETHER SHOOTING FIXED", the setting is reset to the default value.

    4) After updating the firmware, you will no longer be able to print images taken with a digital camera directly from the instax™ SHARE SP-1/2/3. When printing images using instax™ SHARE SP-1/2/3, please use the smartphone application
(FUJIFLM XApp or FUJIFILM Camera Remote) to import images and print from the dedicated instax™ printer application.