Utilisez vos objectifs en monture E sur les Nikon Z

[Mistral75]

Mise à jour en version 2.04 du logiciel embarqué des adaptateurs Megadap ETZ21 / Pro / Pro+ :

ETZ21 Pro Firmware – Megadap

• Optimized the focusing performance of zoom lenses during continuous zooming, effectively improving the possible out-of-focus issue
     
• Resolved the compatibility issue of the Viltrox AF 85mm F2.0 STM ED IF lens with ZR camera bodies
     
• Enhanced the image stabilization performance of manual lenses: For manual lenses without electronic contacts, this update optimizes their image stabilization performance in stabilization mode.
  
  The principle is as follows: Utilize the "Focus Ring Rotation Range" setting item in the Nikon camera menu, and match it with the actual focal length of the lens by setting the corresponding value — after the user completes the corresponding settings, the lens focal length information can be transmitted to the camera body through the adapter ring, realizing the coordinated work of the image stabilization function.
  
  The specific operation steps are as follows: Enter the camera menu, select " CUSTOM SETTINGS MENU" – "f Controls" – "f10 Focus Ring Rotation Range" in sequence. By setting the value corresponding to the focal length, the image stabilization performance will be significantly optimized. The corresponding values are as follows:
  
  Non-linear = 50mm
  90° ≤ 14mm
  120° = 20mm
  150° = 25mm
  180° = 30mm
  210° = 35mm
  240° = 40mm
  270° = 45mm
  300° = 60mm
  330° = 70mm
  360° = 80mm
  540° = 85mm
  720° = 95mm
  More ≥ 105mm
  
  

Lien direct de téléchargement : https://www.megadap.com/wp-content/uploads/2025/12/MLZ_ETZ21PP0204.rar