HP LP2475w - Rapport de calibration, vos avis et vos conseils

Démarré par Pier², Janvier 08, 2011, 22:30:17

« précédent - suivant »

dg69

Bonjour,

Je viens de refaire quelques essais de caractérisation avec dispcalGUI (LP2475W + spyder3 express)... Et je voudrais vous poser 2 questions :

Utilisez-vous les fichiers de correction pour le couple écran-sonde fourni ici http://argyllcms.com/doc/ccmxs.html
----
Explication tirée du site dispcalGUI:
Colorimeters need a correction matrix in hardware or software to obtain correct measurements from wide-gamut displays (please also see "Wide Gamut Displays and Colorimeters" on the Argyll CMS website for more information). The latter is supported when using Argyll CMS >= 1.3.0, so if you own a wide-gamut display and colorimeter which has not been specifically tuned for this display (i.e. does not contain a correction matrix in hardware), you can apply a correction matrix that has been calculated from spectrometer measurements to help better measure such a screen (but you need a spectrometer in the first place to do the necessary measurements to create such a matrix, or you may look for a suitable correction matrix on the Argyll CMS website—please note though that a matrix created for one particular instrument/display combination may not work well for different instances of the same combination because of generally low inter-instrument agreement of most colorimeters). If you buy a screen bundled with a colorimeter, the instrument usually has been matched to the screen in some way, so you may not need a software correction matrix in that case.
----

Et enfin y en a-t-il parmi vous qui utilisez ViewNX de Nikon... Par ce que visiblement ViewNX est incapable d'assurer la gestion des couleurs avec le profil ICC généré par dispcalGUI... Je vais peut être ouvrir un autre fil la dessus dans la rubrique ad. hoc.

Merci pour vos réponses.

janfi67

#26
Je n'utilise pas la matrice de correction. J'ai essayé pour voir, mais le résultat était catastrophique et le gamut obtenu me semblait très bizarre.

Alors que sans, je suis satisfait du profil obtenu. Il faut croire que la sonde spyder s'en sort très bien toute seule.

Le profil généré par Argyll a sans doute un problème dans 2 tags, dmnd et dmdd. Photoshop se plaint, mais l'accepte quand même et ICC profile inspector n'arrive pas à décoder ces deux tags.

Je crois que les tags sont deux chaines ASCII qui décrivent le nom du device et son fabricant. Rien de très important, sauf quand ça empêche le chargement du profil

freemanjazz

Pour information l'écran HP LP2475W est réapparu au catalogue HP !! ::)