Olympus E620 et flash Metz 32CT3

[esox_13]

Et aussi la réponse de Metz concernant l'utilisation du 32CT3 sur les DSLR :

Please be informed, the flash unit "mecablitz 32 CT-3" can be used on your digital camera in automatic flash control mode "A" or manual flash mode "M".

For the connection of the flash unit to your camera we recommend you to use the "Standard foot 301" (only centre contact). With the "Standard foot 301" the flash unit can only be released by the camera. Special flash functions are not available.

Please, see also the archive with further flash units on our homepage:
http://www.metz.de/en/photo-electronics/sca-adapter/archive.html

The camera has to run in the manual camera mode "M". The settings for ISO, f-stop (aperture) and shutter speed on your camera "Olympus E-620" have to be done manually.

The flash unit "mecablitz 32 CT-3" has also a low voltage ignition circuit according to ISO 10330. A damage of your camera by high voltages of the flash unit has not to be feared.

We hope this information has been of help for you and remain

With kind regards

Technical Support

Donc pas de danger à utiliser le 32CT3 et le 32 MZ3 sur des DSLR en mode manuel et Auto !