Fujifilm X-M5

Démarré par Mistral75, Octobre 06, 2024, 15:42:28

« précédent - suivant »

teo91

#275
Citation de: Christophe NOBER le Février 11, 2025, 19:15:29Avec un grand angle , il suffit d'une distance minimale au sujet pour que tout soit net , en photo de ville de nuit , il n'y a aucun problème

Merci pour ton retour Christophe. On peut considérer grand angle jusqu'à 50mm ? Y a t'il une astuce pour calculer focale et ouverture mini ?

Mlm35

Table d'hyperfocale.

Peut être aussi que l'écran puisse afficher les zones nettes (zèbra).
malouin nature, pas naturiste

teo91

Merci à tous les 2, une pratique particulière à appréhender

el magnifico

X-pro3 et X-T5 ,what else ?

jdm

Citation de: Mlm35 le Février 12, 2025, 05:07:13Table d'hyperfocale.

Peut être aussi que l'écran puisse afficher les zones nettes (zèbra).

 C'est plutôt le surlignage, non ?
dX-Man

christal2

Fujifilm a publié une nouvelle mise à jour du firmware pour le X-M5 en version: 1.10  (27 février 2025)
Ainsi qu'un guide des Nouvelles Fonctionnalités Version 1.10.

X-M5 Version: 1.10
https://www.fujifilm-x.com/fr-fr/support/download/firmware/cameras/x-m5/

X-M5 Nouvelles Fonctionnalités Version: 1.10
https://fujifilm-dsc.com/en-int/manual/x-m5/x-m5_nfg_fr_s_f.pdf?_ga=2.161329085.1888472010.1740639742-630677724.1727340810

Detail of the firmware update
Ver.1.10
The firmware update Ver.1.10 from Ver.1.00/Ver.1.01 incorporates the following issues :
 
Regarding the details of No.1, download the "X-M5 New Features Guide[Ver.1.10]" from our website.

・X-M5 New Features Guide:]English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic

1. "SUPPORT WEBSITE" is added to the "USER SETTING" in the "SET-UP" menu.
By scanning the QR code on the screen with your smartphone or other device, you can easily access firmware updates information, user manuals, FAQ and other content on the support page.
Note:The link will connect to the Global site. To change the language, select from the settings icon in the upper right corner of the site screen.

2. A firmware bug is fixed that the settings will not be renewed in "CUSTOM SETTING" after camera is turned off and on when you save the following settings in "EDIT/SAVE CUSTOM SETTING", [Settings]
[Settings]
・"ISO SETTING"
・Some of the "AUDIO SETTINGS" (ex. "MIC JACK SETTING", "INTERNAL MIC LEVEL ADJUSTMENT", "EXTERNAL MIC LEVEL ADJUSTMENT", etc.)

3. A firmware bug is fixed that the camera does not turn on even if the power lever is on when a specific SD memory card is inserted.

4. A firmware bug is fixed that the "WRITE ERROR" occurs in rare cases after shooting when using specific SD memory cards.

5. A firmware bug is fixed that the image loading speed gets slow when transferring images to "FUJIFILM XApp" using "SELECT IMAGE & TRANSFER" in the "PLAY BACK MENU" with a large number of shots.

6. Other minor bugs are also fixed.

seba

Citation de: jdm le Novembre 30, 2024, 08:19:15Superbes exemples Christophe 🤓

http://poirierstephane.free.fr/photos/index.php?/page/indice_de_lumination
Comment lire ce tableau ? Rien de plus simple ! Une scène en plein soleil à midi (IL 15) avec un capteur dont la sensibilité est réglée à 100 ISO sera bien exposée si l'on utilise l'un quelconque des couples temps d'exposition / ouverture suivant:

(1/8000, f:2), (1/4000, f:2.8), (1/2000, f:4), (1/1000, f:5.6), (1/500, f:8), (1/250, f:11), ...

Si la sensibilité du capteur est 200 ISO, alors les couples suivant seront à considérer:

(1/8000, f:2.8), (1/4000, f:4), (1/2000, f:5.6), (1/1000, f:8), (1/500, f:11), (1/250, f:16), ...

Quelques valeurs de l'indice de lumination par rapport à des situations courantes :
14-15 Temps clair à ensoleillé

13 Temps couvert

11 Au coucher du Soleil

8 La ville de nuit, éclairée artificiellement

6-7 Concert, spectacle

4-5 Eclairage artificiel domestique




J'ai toujours trouver ça compliqué, très théorique et encore pire que le zone-system !  ;D



Le tableau et les explications ne sont pas corrects.

seba

Voici comment fonctionnent les indices de lumnation.
Par exemple une scène en plein soleil à midi, ce n'est pas IL15, mais IL15 pour 100 ISO, IL16 pour 200 ISO, IL17 pour 400 ISO, etc. (premier tableau).
Et on cherche un couple V/D correspondant dans le deuxième tableau.
Ainsi, par exemple, le couple 1/125s - f/16 c'est toujours IL15, ça ne peut pas être un autre IL.

JMS67

Quand sera à nouveau disponible le fuji XM5 introuvable partout

Gerard 13

Citation de: JMS67 le Mars 21, 2025, 16:56:07Quand sera à nouveau disponible le fuji XM5 introuvable partout

Ouf, vous n' avez pas mis de point d' interrogation à la fin de votre phrase, donc ce n' est pas une question, car si c' était le cas elle serait tellement idiote, désolé, qu' elle ne servirait strictement à rien !
Aucune formule de politesse de votre part donc je fais de même  !

Gerard 13

Citation de: JMS67 le Mars 21, 2025, 16:56:07Quand sera à nouveau disponible le fuji XM5 introuvable partout

Bonjour cher monsieur  ;) ,
Je vous signale que les deux versions nues sans objectif sont disponibles sur le site de la Fnac depuis deux jours !

christal2

Fujifilm a publié une nouvelle mise à jour du firmware pour le X-M5 en Version: 1.20  (22 juillet 2025)
ainsi qu'un guide des Nouvelles Fonctionnalités Version Version: 1.20

https://www.fujifilm-x.com/fr-fr/support/download/firmware/cameras/x-m5/

Detail of the firmware update
Ver.1.20
The firmware update Ver.1.20 from Ver.1.10 incorporates the following issues:


< Important notice after firmware update >
* After the firmware update, you cannot connect the camera to the iOS version of FUJIFILM Camera Remote. Be sure to upgrade your smartphone or tablet to iOS13 or later and use FUJIFILM XApp instead of Camera Remote.
* After the firmware update, you cannot use the FUJIFILM Camera Remote (Android version) to connect with the camera through Bluetooth: Ver.4.1 and earlier. To pair via Bluetooth, smartphone/tablet must be Bluetooth Ver. 4.2 and latter.


Regarding the details of No.1 download the "X-M5 New Features Guide[Ver.1.20]" from our website.
・X-M5 New Features Guide: English, Français, Deutsch, Español, Italiano, Nederland, Polski, Svenska, Norsk, Dansk, Pусский, Suomi, 中文简, 中文繁體, 한국어, ภาษาไทย, Arabic

1.  The wireless communication security is enhanced while camera is connecting with a smartphone application or external device wirelessly.
After updating the firmware, security will be enhanced, so the connection procedure with the smartphone application will be changed, or the "WIRELESS COMMUNICATION" setting menu on the camera will be deleted (see section, <Changes after firmware update> below for details).


   < Changes after firmware update >
   1) The procedure for pairing the camera with a smartphone is changed.
   2) "WIRELESS COMMUNICATION" option in the "SHOOTING SETTING", "MOVIE SETTING", and "PLAY BACK MENU" are removed.
   3) "WIRELESS COMMUNICATION" option is removed from the functions assigned by the following operation flow in the "Setup Menu".
・Operation flow: "BUTTON/DIAL SETTING" ➔ "FUNCTION (Fn) SETTING"
   4) "WIRELESS COMMUNICATION" option is removed from the functions assigned by the following operation flow in the "Setup Menu".
・Operation flow: "BUTTON/DIAL SETTING" ➔ "POWER ZOOM LENS FUNCTION (Fn) SETTING"
   5) "WIRELESS COMMUNICATION" option is removed from the "REC BUTTON SETTING" menu in the "BUTTON/DIAL SETTING" of the "Setup Menu".
   6) "instax PRINTER CONNECTION SETTING" menu is removed from the "NETWORK/USB SETTING" of the "Setup Menu".
   7) "instax PRINTER PRINT" option is removed from the "PLAY BACK MENU".

       < Precautions After Firmware Update >
   1) Network security level is improved by updating to the latest versions for both the smartphone applications (FUJIFILM XApp / FUJIFILM Camera Remote) and connected cameras, since the latest versions change the network setting menus and connecting procedures to enhance the wireless communication security.
Be aware that the security level remains unchanged in the following case.
* In case that the camera's firmware is the current version, and the smartphone application (FUJIFILM XApp / FUJIFILM Camera Remote) is the latest version.

   2) After updating the camera firmware, if the smartphone application (FUJIFILM XApp / FUJIFILM Camera Remote) is not updated to the latest version, you cannot connect to the camera. Be sure to upgrade your smartphone application software to the latest version.

   3) After updating the firmware, the "WIRELESS COMMUNICATION" setting menu of the camera will be removed, so if the "CONNECTION MODE" setting in the "NETWORK/USB SETTING" menu is set to "USB TETHER SHOOTING FIXED", the setting is reset to the default value.

   4) After updating the firmware, you will no longer be able to print images taken with a digital camera directly from the instax™ SHARE SP-1/2/3. When printing images using instax™ SHARE SP-1/2/3, please use the smartphone application
(FUJIFLM XApp or FUJIFILM Camera Remote) to import images and print from the dedicated instax™ printer application.